Originally I wrote this white paper to be consumed in 5 different chunks. However, having finally finished my thoughts on the topic (for now), I felt compelled to simply get it out there. I hope to hear ideas, both constructive and destructive (why not?) to see how this idea is received and whether or not you feel that it would be a valuable tool in your profession.
Click on the link below and let me know what you think!
I find it hard to motivate myself sometimes. I don’t know of anyone that is always on. We have days (even weeks) where it is hard to get anything accomplished. A slump.
But how do we keep ourselves motivated when there is no other stimulus to do it for us? I was outside playing with my dog, Bernie the other day and I noticed that he was able to keep himself motivated even when I wasn’t helping out (go ahead, watch the video and don’t say “Aww”, I dare you).
Change Things Up!
The same thing all of the time is comforting, but it also creates monotony. Try something different, even something as simple as a new route during the commute.
Set Your Goals
Knowing what you want to accomplish and keeping it in front of you is a good way to always get you back on track. It is better to be going somewhere slowly than to not be moving at all.
Take a Break
Get out of the rut by just getting away. Some of my best ideas have come to me when I am not even thinking about the same subject.
Seek Advice
Get someone else’s perspective. Their point-of-view may be just what you needed to get you going.
In the end it is your own responsibility to provide motivation. We often look to others to inspire us and it is true that these shots in the arm are necessary sometimes. But for the day-to-day we must take accountability for our own actions. It’s not someone else’s fault if we don’t get up in the morning. Or throw our own Frisbee.
We all have experienced pain in our lives: physical, emotional, psychological, nagging, and excruciating. But experiencing pain is normal. In fact, not experiencing pain can lead to greater damage since we wouldn’t know when to pull back or change our approach.
Without pain we would not experience the same world as we do with it.
5 Reasons to Look Forward to Pain
Pain can create clarity. It sharpens the senses. Pain is something we don’t want to repeat so we focus on it. I recently watched an episode of Mythbusters where they tested the myth that slapping someone will bring them to their senses, and they actually showed an improvement in mental faculties after being slapped. Pain brings us into “fight or flight” and our bodies respond with vigor.
We learn from pain. Pain is one of the best teachers we have as a child. The best illustration is touching a hot stove: immediate feedback; lesson learned. But it can apply in the business world as well. A painful experience will help us to prioritize and put systems in place to prevent that pain from reoccurring.
The dichotomy of life. There is no good without evil, no black without white, no pleasure without pain. We learn to appreciate the pain-free moments because we have experienced the pain.
We are more diverse because of our pain. We can also empathize with others because we better understand their situation when we have experienced it ourselves. It makes us stronger people and better people.
Art, music, invention are all children of pain. Many of the world’s most beautiful creations are results of painful experiences. We find them beautiful because we have also experienced the pain that influenced the brushstroke or the chord progression. Pain evokes emotion.
So, no matter the temptation, don’t run from a painful experience. Instead, learn from it. Don’t avoid something because it will be painful. Some of the best work had been painful for the people who complete it. But in hindsight, the most painful work completed is usually the most fulfilling.
“Computer, give me a ham sandwich.”
We may not be too far away from that as the technology of rapid prototyping is moving into the food industry. Today, 3D printing is being used to create custom parts that can have remarkable strength and functionality. The fully-assembled part can actually be made with tolerances around 2-thousandths of an inch and with moving parts already assembled.
In the food industry, it is simply a matter of time until multiple combinations of ingredients and formulas are created to produce food on-demand. However, the complexity of organic systems is still out of reach for the industry today and the complex reactions that occur during cooking would be difficult to model in a prototyping machine.
But what are some examples of ways we can leverage this technology today.
I’m sure I missed many of the ways this technology can help the manufacturing environment. There are engineering and new product testing that are a given for this type of technology. The 3D printing world is already starting to invade the food industry by printing out chocolate and sugar candy.
Now, how about that sandwich?
We are so often caught up in the reactive, and it is an inevitable part of life and business. There is too much data to be able to anticipate all of it coming at us. So how do we make a transition from reactive to preemptive?
Know the Destination
You can’t go somewhere unless you know where you are going. Simple, I know. But do you jump in your car to go somewhere without having a destination in mind? Probably not. So what does your professional destination look like?
Taking time to plan an endgame is necessary for a huge transition. You need to be able to define success not only for you as a leader, but for the team as well so that there is a sense of momentum and, ultimately, accomplishment.
Set up Your Waypoints
Every flight plan has waypoints, intermediate destinations that help to set the overall course. Your journey from Reactive to Proactive should have waypoints as well. In Project Management they are called Milestones.
The purpose of the waypoint is to provide you with a series of connected destinations that help to ensure a safe path is set and that you are moving in the right direction. You can choose your waypoints to be in units of time, percent completion, accomplishment of specific events, or even arrival of the destination for only a part of the entire vision (completing the journey for one product line before expanding to another).
Understand Your Compromises
It’s difficult to get everything you want. By knowing where you need to compromise you allow yourself a safety that will prevent you and your team from being discouraged. Know where you can balk and where you mustn’t in order to help ensure success. Some areas cannot be compromised, define them. Others can be sacrificial should circumstances require it, be ready to sacrifice.
Communicate Your Destination
Give others the vision you have. Allow your team and your supporters to envision the destination with you. Take every moment you have to describe your destination in detail. Outline how it looks and give them the ability to see it with you. This will make others hungry to help you succeed.
If I told you we were going on a road trip your first question would be, “Where to?” If I simply said, “West,” that wouldn’t be very motivating. If I said, “The beach,” that might be more motivating. But if I took the time to describe the beach, how it looked at sunset, the warm breeze that blew on my face, the sound of the waves crashing on the nearby cliffs, and the long boardwalk the stretched over the water, you might be more excited about going there.
Invest in the Change
Change is a movement of inertia. The organization has momentum in its current direction. If you want to change that direction, you have to be willing to invest in the force required to overcome that inertia. This investment may come in the form of additional people, a new technology, external support, rebranding and marketing, or a number of other things that will give you the force needed to change your momentum.
Celebrate the Change
I am a big fan of celebrations. They can come in small forms of encouragement or lavish company parties. The purpose is to keep people motivated. Once you have gained a little momentum in the new direction you have to keep pushing. Celebrations as simple as a pat on the back can help to accelerate your change.
The Challenge
If you are in the midst of a change, look at your flight plan. Do you know the destination? Do you have your waypoints? Do you know where you may have to make compromises? Have you visualized your destination and shared that with others? Have you made the proper investments?
If not, take the time to figure it out.
Do you see a need for moving from reactive to proactive in your business, in your life? Start today with planning on how to get to your destination.
Image Courtesy of Gualberto107/FreeDigitalPhotos.net
Right now we have a shortage of skilled labor in the manufacturing environment. It is my observation that this shortage comes from three main areas: retirement of experience, educational demands, and an emphasis on college degrees. But regardless of the reasons (and we will delve into that) I think I have come up with a solution.
So stop whining, roll up your sleeves, and let’s get to work.
The Reasons…
Loss of Experience
The Baby-Boomers are retiring. This restless, workaholic generation is getting to the age where they can enjoy the golden years. The baby-boomers were born from 1946 to 1964, putting the oldest of this group at age 68 and the youngest at age 50. Many of those from this generation started working right out of high school with a company and, in the age of benefits and pensions, stayed with that company for the required 25 years before they could start drawing on their retirement funds. That means that the earliest of the baby-boomers started retiring in the early 1970’s! We have seen a decline in capabilities ever since.
Educational Demands
Not only have vocational training options been in a decline over the last several decades, but the technological requirements have been climbing exponentially. Now, for a mechanic, not only does he need to understand how to turn a wrench, but also how to lock out equipment, interface with pneumatics, hydraulics, and even PLCs and light ladder-logic programming.
Electricians have seen their trade go from simple dry contacts and relay-logic to smart instruments, networking (Ethernet, ModBus, Profibus, DeviceNet), and a dominating world of micro controllers and systems such that even the simplest of machines have to communicate to another controller.
Machine operators are expected to understand how to work with HMIs (Human-Machine Interfaces) that are increasingly complex. They have to troubleshoot on a daily basis with equipment that is both mechanically and electrically more complex than ever before. Additionally, companies are trying to run leaner and have reduced technical support functions to a minimum, requiring that operators know more about how their equipment works and how to fix it for simple repairs.
Everyone has to go to College
Only 62% of college graduates are actually working at their education level. Only 27% of grads are working in a field of their degrees. So why is there such an emphasis on college?
We have been conditioned in my generation that we must go to college if we want to have a successful life. Don’t get me wrong, I am a big proponent of education. But I feel that our educational system is broken as well as overstated. We are being educated in the wrong things. Some people are just going to college to get the degree. I know of several people (and maybe you are one of them) that went to college before they knew what they wanted to do for a living. Most people don’t even figure it out until they graduate.
However, college tuition is getting to a point that the average student will pay over $120,000 after 4-years (this is from the University of Illinois for Resident). If that is taken out in a student loan and paid back over 10 years it will require a monthly payment of over $1,300 (from FinAid.org). The recommended annual salary to pay back this loan is over $100,000. As a matter of fact, you have to extend the term to 30 years to get below a $100,000 annual salary. Really? Is this realistic?
The Solution?
Get your company to do some research on how you can tap into government funds. There should be some options with your local government or state that can help you offset some of these costs.
Look into apprenticeship programs. The oldie is a goodie. You can pay a smaller wage to the inexperienced and incentivize them to take classes and perform onsite qualifier tests to move to the next wage bracket. Get back to building your own trained workforce.
Develop your own training programs. Stop trying to hire them in with the technical skills. Teach them yourself. Create a training program that is supplemented with community college programs. You can even bring back that retired expert part-time as a trainer so that he can teach your young folks how to work on your specific equipment.
Talk to your community colleges about adding vocational studies. Partnering with these schools can help to get your costs down and provides you access to additional resources.
In short, stop expecting to find the right person off of the street. It is probably not going to happen. Instead, stop complaining and make something happen. Create your own talented workforce.
Image courtesy of adamr/FreeDigitalPhotos.net
The simplest solution is usually the correct one.
But this isn’t always true when it comes to people. We are exceedingly complex; emotionally, socially, psychologically. Humans are influenced by internal, unseen drivers just as much (if not more) than obvious external stimuli.
The problem is not that the method of Ockham’s razor is flawed. The issue is that there is typically insufficient data to arrive at reasonable assumptions in the first place.
In Life
I love my wife dearly, but I just don’t understand her sometimes. I’m sure she would say the same of me as well. Most of the time we try to be honest and open with one another, but it isn’t always easy.
I have recently had to deal with the death of my dog, Sandy. She was very important to me and it has been a difficult recovery. I don’t always show things the same way that my wife expects me to, and she interprets that as a different emotion. Likewise, she tries coping with the loss in ways that I can’t understand.
As a result, based on the data we have observed, we have made assumptions about one another. Those assumptions led us to believe that our assessments of one another were accurate because they were the simplest of the solutions. However, our assumptions were wrong, based on a misinterpretation of the data, and we have had to engage in more open dialogue to better understand one another through our grieving processes.
This is true in many personal situations when interacting with friends, family, and acquaintances. We make assumptions that lead to judgment. It is natural. It’s human. It’s complicated.
At Work
We often forget that people are people. We try to separate work from home, but that doesn’t really happen. We have a hard time relating to people that we simply don’t know well. We may be having a rough day and then someone asks something of us that is troublesome and we immediately jump to conclusions about motive and method.
Solving problems at work is easier when it is about a machine, a program or a system. Those things don’t muddy the waters with emotion and intellect. They simply work. People, on the other hand, react, anticipate, judge, emote, and in general, complicate the work environment. This level of complexity can be a bit much and the data is too intricate to fully understand. As a result we make assumptions about people, but our assumptions can lead us astray.
A Good Assumption
I have found my own razor when working with others.
This person’s intentions were right and good unless otherwise proven.
By using this razor I have simplified my life. It has prompted me to ask questions, get to know people, and expect decency from others. It has changed my perspective of people. And I firmly believe it is true.
I challenge you to take one week and apply this razor to your life. See if it changes you.
We all chase our tails at some point in our careers. Some of us more than others. We are looking for a result that is not even possible to achieve but we are so consumed with the chase that we aren’t even looking beyond the circle in which we are spinning.
I had such a situation when I was managing a production department. I was tasked by my managers to reduce changeover times on my high-speed bottling lines. Changeovers accounted for over 8 hours of downtime each week. When you cyphered how much production that amounted to it became quiet the priority to reduce that number. It was also the number one cause of downtime on my production lines when Pareto’d with all of the other documented downtime reasons in my department.
As a result of the data, we were putting a lot of time and energy into reducing changeover times. We were trying alternative crewing, modification of equipment parts, timing of lunches and breaks and alternative scheduling whenever possible. We did see some modest improvements, but nothing that removed changeovers from the top spot of the downtime list.
During a meeting I was asked by the V.P. what the improvement on the line would be if we were to reduce changeovers. Through all of the efforts we had made, we had never stopped to ask the simple question of the potential of the improvements. So, I answered with a political, “I’ll get back to you on that,” and I went to my office to crunch the numbers.
It turned out that we were only capturing 20% of our actual non-productive time (some of that was in reduced performance and minor stops as well as untracked downtime events). But changeovers were tracked 100% of the time. Using these numbers along with our scheduled run time over the previous year I learned that changeovers only accounted for 7% of our inefficiencies. Even if we were able to cut changeovers in half we would only realize a 3.5% gain in efficiency on the line. My lines were running at an average of 85% efficiency (against an accounting standard, that is a whole other topic) when my budget was 98% efficiency (again, a whole other topic).
All of that effort wasn’t going to get me even close to my goal. My efforts had to be in other areas and it would take a combination of improvements to get to where I wanted to go. I immediately changed by tactic and went back to the meeting with a whole new approach on how to improve my production.
Excited about the new opportunity, I began informing the V.P. of my intentions and how they would better our systems. His reply, “That’s great, but when are you going to get changeovers down?”
The moral of the story is that you need to look at the potential gains before you invest all of the effort. This can be a hard science application like my example, or building a team, or investing in the development of an individual (you can’t send a duck to eagle school, see here, and here). Understanding what you can gain will not only give you proper motivation when the gain is significant, it will help you set a plan to put the efforts of you and, more importantly, your team in the right proportions to maximize success and reduce frustration. In short, as Mr. Stephen Covey stated, “Begin with the End in Mind.”
Building Bridges 
